Listings Archives - Page 2 of 19 - United Exchange USA

Case 1150H Bulldozer Crawler is powered by a turbocharged 6-cylinder diesel engine providing 124 horsepower. It has been in operation for 3698.8 hours. The bulldozer is equipped with a case consistent-mesh powershift transmission with 4 forward and 4 reverse gears, making it versatile. The blade measures 10 feet in width and 44 inches in height. With the blade down, the dozer spans a length of 16 feet 11 inches. The wide tracks span 8 feet, providing stability and traction on various terrains. The cab height is 9.91 feet, offering ample visibility and comfort for the operator.

Case 1150H Bulldozer Crawler $58,000 “No Longer Available.”

Mac End Dump Trailer $58,000 “No Longer Available.”

Caterpillar 939C Crawler Loader. A 1999 year model track loader with 1,928 hours on a Caterpillar 3046 turbocharged 6-cylinder 90 hp engine. The machine is equipped with a Hystat transmission and weighs approximately 22,000 lbs. The crawler also comes with the benefit of a 4 in 1 clamshell loader bucket in addition to a Caterpillar No. 3 ripper implement attachment. The dimensions for shipping are as follows: Length of crawler with the bucket on the ground 14.3 ft in. Width to outside of the tracks 6.42 ft in. The height to the top of the cab is 9.08 ft in.

Caterpillar 939C Crawler Loader $36,000 SOLD!

Extec Robotrac Mobile Screener. 2008 year model. BMF 1012 4 cylinder Deutz water cooled 111 horsepower diesel engine with 3,444 hours. Heavy duty mobile vibrating screen scalping sifter. The machine is 36' feet 11" inches long by 8' feet 6" inches wide and 10' feet 11" inches high. Screen width is 8' feet 6" inches and screen length is 10' feet 17" inches. Belt width is 39" inches and the feeder conveyor width is 47" inches. Discharge conveyor height is 11' feet. The unit is remote controlled and has been engineered to process approximately 800 tons per hr.

Extec Robotrac Mobile Screener $57,000 No Longer Available!

JCB JS220LC Crawler Excavator. A 2007 model (4HKIS) with a 4-cylinder turbocharged 2353 engine has run for 6413 hours and has 172 hp. The machine has a Lemac hydraulic thumb and a 42-inch bucket. It weighs 22.2 tonnes. Shipping measurements are 31.42 ft in length, 10 ft in height, and 9.83 ft in width outside of tracks. It also comes with heat and A/C. The machine is well-maintained and runs properly.

JCB JS220LC Crawler Excavator $38,000 No Longer Available!

Fisher portable air separator.

Fisher 13-ft. Air Separator $197,000 SOLD!

Mack DM600 Cab & Chassis. Double frame. 673 - 6 cylinder diesel engine with turbo and 214,430 miles. Two stick 5 + 4 Transmission with 52K lbs. rears. Good tires all around. Air ride driver seat, air brakes and differential lock. Frame measurement from back of cab to end of frame is 21.4 ft. in.

Mack DM600 Cab & Chassis $6,000 SOLD!

International 2674 Cab & Chassis $6,500 SOLD!

Mack CL733 Day Cab. 2001 model heavy spec. Double frame. The engine is a Cummins Signature 600. It has 407,040 miles and 12,077 hours. The engine will need work. A spun bearing will require a new crankshaft or to have the one in it machined back to repair. Additionally it's questionable as to weather the block will need line boring or not. The transmission is a Fuller Eaton 18 speed. Front axle weight is 12,860 and the rears are 44K lbs. This Mack CL733 was being used to haul dump trailers and therefor is set up with the necessary wet line and in cab pump and PTO control equipment. The semi's interior would likely require a shampoo and detail but is in otherwise beautiful condition without any rips or tares as can bee seen in the photos. GVWR is 56,860.

Mack CL733 Day Cab $25,000 SOLD!

Caterpillar 416 Backhoe Loader Extendahoe. 1987 model with 7366 hours on a 4 cylinder 236 cubic inch 62 horsepower Perkins direct injection diesel engine. 4WD power shuttle shift transmission having four forward and four reverse gears, a single stage torque converter and a top forward speed of 19.7 mph. The 1 1/3 yard - 89" inch wide front loader bucket capacity is 5,250 lbs and has a load height of 10.95 ft in. The fuel capacity for the machine is 22 gallons. The standard dig depth is 14.21 ft. in. with the extended max dig depth is 18.5 ft. in. Transportation dimensions are as follows: Height from ground to top of cab, 11.32 ft.in. Length, 22.44 ft.in. Width, 89.4 ft.in. Weight, 14,400 lbs. In addition the backhoe front loader is plumbed for other implements to be used such as a hammer or clam bucket. The front bucket is also plumbed for a four in one bucket use.

Caterpillar 416 Backhoe Loader Extendahoe $12,000 SOLD!